SpeedDome and Keyboard Setup

Keyboard Operating for SpeedDome PTZ Camera
Keyboard Model: AU40B

Select Camera
Press Camera ID button
Press 1 for cam 1
Enter

Setup Preset Location
1. Move to the location you want
2. Press Preset button
3. Press 1 for preset location 1
4. Enter

Go to Preset Location
1. Press Call button
2. Press 1 for Preset 1 location
3. Enter

Cruise Function
(Neon, Samsung, Pelco-D / P only)
Description: it will go from preset 1 to preset 2, 3, 4 .... and continues

You must finish setting the Preset location first. and Test preset by call button to make sure it is working.

Setup Cruise Step
(remember, this cruise just for set the speed / time, not setup the position. Posisition must setup by preset location)
1. Press Shot button.
2. press 1 to go.
3. ON

On the display you should see Track=01 Sum=06

Press TELE to go down menu, Press Wide to go up menu.

Set No.:01 Point, Speed and Time
Set No.:02 .... etc.

When finish setting the speed/time. Press OFF to save.

Notice that if you move the joystick to different location, it will treat as exit without save.

Set AutoPan Function
Start Point:
1. Press Auto + ON

Move to the end point location:
End Point:
1. Press Auto + OFF

Run AutoPan
1. Press Auto + Enter