How To Setup DDNS For Dynamic IP Address

1. Locate DDNS Setup program from Setup CD. Open DDNS Folder.

2. Run SETUP.exe. Keep on going Next until Finish.

3. Double Click Dynamic DNS Service from Desktop to Start

4. Click Register.

5. If you cannot see this page, close it and reopen it again. Sometime it cause by service busy. Register your DDNS website nameFor example, if you choose "netZeye" as your username, your DDNS website name will be: http://netZeye.dipmap.com

6. After you get Send, you should get confirm information. Click [x] to close this information page.

7. Now, you are back to this screen. Please enter username & password that you just created. Click Save.

8. After You click Save, You should see Update successful message. If you still see Failure messege, possible situation:

1. Server busy. Maybe it take more time to update, try again later.

2. Is your Multicam software minimize? If not, please make sure Multicam software is ON.

3. Is your Port 80,81 allow to transfer signal?

9. Please click [ _ ] Minimize. Remember: Do not chose close the program. If you close it, then your webname cannot update automatically.

10. Open Internet Explorer and type: http://netzeye.dipmap.com. If you use different port number than 80, please type http://netzeye.dipmap.com:2550